FlexiOH^® Splints / Slabs are designed for immobilization in the pre-operative, post-operative, acute swelling and rehabilitation period. FlexiOH^® has an built-in soft hook and loop fastener that secures the splint over the limb which is very comfortable for skin contact. With unique FlexiOH^® technology, this splint gives better patient comfort along with breathability and washability. For application of FlexiOH^® Splint / Slab, healthcare professional need to apply it on the patient’s limb with the soft hook and loop fastener and then cure it with the Rizycure^® light device (recommended) for 3-10 minutes depending on the size of splint/ slab. Once it is rigid, it will provide support during rehabilitation. With valcro, the splint can be removed / adjusted anytime for dressing and rehabilitation.

FlexiOH^® Splints / Slabs are available in different sizes : 3 in X 10 in, 3 in X 12 in, 3 in X 15 in, 4 in X 12 in, 4 in X 15 in, 4 in X 18 in, 5 in X 12 in, 5 in X 15 in and 5 in X 18 in. All of the Splints / Slabs vary in terms of length and width.

AVAILABLE SIZES

APPLICATION PROCESS

FlexiOH^® Splint or Slab Immobilizer application process is as follows:

Step – 1 : Choose the appropriate size from given chart

Step – 2 : Take the suitable size for the application

Step – 3 : Apply the splint by passing the hand in between the loop and splint

Step – 4 : Check the position of the loops is comfortable to the patient

Step – 5 : Start tightening the first loop at the palm circumference

Step – 6 : Tighten the last loop at the end

Step – 8 : Take Fully charged RizyCure^® light device

Step – 9 : Start exposing the splint / slab with RizyCure^® light device

FlexiOH^® Splint or Slab Immobilizer provide ~30 % open area of skin to breathe, wash, and exposure to sunlight which all are necessary to maintain healthy skin.

Here are some videos of demonstration about FlexiOH^® technology, review of doctor and patient as well.